Note: Settings marked with an asterisk (*) can only be used after completing 26: Slippery Slope.
- Make adhesin
- Type: Switch
- If checked, this cell's children will be linked by adhesin.
- Default: No
- Prioritize
- Type: Switch
- If checked, this cell will gain extra nutrient priority when it is dangerously low on mass.
- Default: Yes
- Cell type
- Type: Cell type selection
- The type of the cells that are on this mode.
- Default: Phagocyte
- Initial
- Type: Switch
- Whether or not this mode will be the one placed on the substrate.
- Default: Yes if M1, otherwise No
Child 1:
- Mode
- Type: Mode selection
- The mode of child 1.
- Default: Current mode
- Keep adhesin
- Type: Switch
- If checked, child 1 will keep the adhesin connections that the parent already has, assuming it ends up on the side where the connection is.
- Default: Yes
- Mirror*
- Type: Switch
- If checked, this cell will be mirrored with respect to its parent.
- Default: No
Child 2:
- Mode
- Type: Mode selection
- The mode of child 2.
- Default: Current mode
- Keep adhesin
- Type: Switch
- If checked, child 2 will keep the adhesin connections that the parent already has, assuming it ends up on the side where the connection is.
- Default: Yes
- Mirror*
- Type: Switch
- If checked, this cell will be mirrored with respect to its parent.
- Default: No
- Split mass
- Type: Slider
- The minimum amount of mass the cell should have before it can split.
- Default: 2.538 ng
- Snap values: Split at age 0.50 h, 0.774 ng, 0.900 ng, 1.026 ng, ... , 3.546 ng, Never split
- Split ratio*
- Type: Slider
- The ratio of mass distribution between the two child cells.
- Default: 0.50:0.50
- Snap values: 0.100:0.900, 0.133:0.867, 0.167:0.833, ... 0.900:0.100
- Nutrient priority*
- Type: Slider
- The cell mass flow priority of this cell.
- Default: 1.00
- Snap values:
- Split angle
- Type: Slider
- The split angle relative to the cell's front.
- Default: 0°
- Snap values: 0°, 15°, 30°, ... , 360°
- Child 1 angle
- Type: Slider
- The angle of the first child relative to the split angle.
- Default: 0°
- Snap values: 0°, 15°, 30°, ... , 360°
- Child 2 angle
- Type: Slider
- The angle of the second child relative to the split angle.
- Default: 0°
- Snap values: 0°, 15°, 30°, ... , 360°
- Red color
- Type: Slider
- The amount of red that this cell has.
- Default: 0.000
- Snap options: 0.000, 0.044... , 0.088..., 0.133..., ... , 1.000
- Green color
- Type: Slider
- The amount of green that this cell has.
- Default: 0.000
- Snap options: 0.000, 0.044... , 0.088..., 0.133..., ... , 1.000
- Blue color
- Type: Slider
- The amount of blue that this cell has.
- Default: 0.000
- Snap options: 0.000, 0.044... , 0.088..., 0.133..., ... , 1.000
- Adhesin stiffness*
- Type: Slider
- The amount of resistance to rotations that the adhesin connection should have.
- Default: 0.000
- Snap options: 0.000, 0.044... , 0.088..., 0.133..., ... , 1.000
- Cytoskeleton
- Type: Slider
- The hardness of the cell.
- Default: 1.0000
- Snap options: 0.5000, 0.5625, 0.6250, ... , 2.0000
- Adhesin length*
- Type: Slider
- The length of the adhesin connection made when this cell splits.
- Default: 0.000
- Snap options: 0.000, 0.044... , 0.088..., 0.133..., ... , 1.000
- Max connections*
- Type: Selection
- If the cell is already connected to this many or more cells, it will not split.
- Default: 20
- Options: 1, 2, 3, ... , 20
|